We bring forth highly efficient Chlorination Plant such as water chlorination plant, gaseous chlorination plant and many more. The Water Chlorination Plant that we offer is used for the purification of water. Our Chlorination Plants are made from optimum quality raw materials like PVC and Teflon that enhance their resistance and strength. Our all plants are of durable nature and require low maintenance cost. These plants are very easy to install and operate. In addition to this, we are one of the prime Gaseous Chlorination Plant Manufacturers in India.

Details of Components
They are mounted on a big panel board ( 4̢۪ X 2̢۪ ),they consist of Chlorine flow meter, primary filter and safety gauge on its top. Safety loop with nuts at both ends. Besides, there are plastic parts such as secondary filter with NRV on top. Chlorine water mixing chamber and chlorine water solutioniser. In addition, there will be gas bend and water bend joining three PVC chambers and Teflon pipe connecting chlorine cylinder to the Chlorine flow meter.

Liquefied chlorine drawn from a steel cylinder gets vaporized at normal room temperature and is led through Teflon connecting tube to the primary filter on the panel board which would arrest all possible cylinder impurities in gas so that they would not abstract the flow of gas through small apertures in the plant. Safety gauge on the primary filter will show pressure only in case of any blockage in any part of the plant. Flow meter will show the flow of chlorine in gms/hour. There will be PVC ‘U’ bend to convey gas from Primary filter to the secondary filter where the gas will be further screened to eliminate all impurities. There will be NRV on top of the secondary filter, hence only chlorine will pass onwards and prevent water to flow back in filter. Water introduced at bottom of the mixing chamber and gas come from top get mixed thoroughly and will flow by a water bend at top into the adjoining solutioniser. The solution will be again mixed thoroughly in the solutioniser and will be further passed gravity to the sump through the PVC outlet and pipe. Usually, one liter of water is required for every five grams of gas for making solution in mixing chamber.

Location of the Plant
It is desirable to provide the chlorinator in a separate room with very good ventilation. This should be as near as possible to the point of application of chlorine solution into the water supply. Accident prevention legislation requires the floor of the room above ground level with a door leading to a free space. A special floor ventilation ( 2’ X 1’) is recommended for better circulation of air. 

Guarantee
Guarantee of the plant for the period of 12 months from the date of supply of the plant, provided the plant is operated strictly as per instructions given by us. Only mechanical defective parts will be replaced free of cost during guarantee period and no free servicing will be done during this period.

General
The plant̢۪s simplicity of design, reliable performance, unique operating principle, easy operation and highest quality components meet all requirements of today̢۪s advanced standard of sanitary engineering .It is sturdily constructed of acid and chlorine proof, corrosion resistant materials providing long life to the plant. Easily installed and inserts adapt plants for their individual control function making replacement, simple and economical. Its maintenance is exceedingly simple and cheap as replacement of corrosion proof plastic parts is minimized. Problem of gas leakages is automatically solved by provision of lead or PVC washers between large contacts areas at all joints.